Sliding Patio Door Repairs
A sliding patio is a great way to enjoy your outdoor space and let more light in. But, if the door isn't gliding smoothly or looks dingy it can be a real headache.
Fortunately, most of these issues can be solved with a bit of DIY expertise. Here are some common problems and solutions.
Tracks that are dirty or damaged Tracks
Over time, the tracks of a sliding patio may get clogged with dust, dirt and other debris. Regular cleaning and lubrication can assist your sliding patio door move smoothly.
A dirty track can cause the door to stick or even make it impossible to close or open, so the first thing you need to clean it. Begin by sweeping away any loose debris. Use a cleaning solution and brush to scrub away any visible dirt. Be sure to go into the nooks and crannies and any areas where the door meets the frame.
After you've scrubbed it, wash the track using a hose or bucket of clean water. Apply lubricant from the store to prevent rust and displace moisture. Before you install the door try sliding it back and forth to see whether it moves easily.
If your door is still stuck, it could be that the rollers are damaged or misaligned, which could hinder movement. In the majority of cases, you can fix it by moving the wheels and lubricating. If your door is very old, however it might be time to consider a new replacement. Before reassembling the track down a drop cloth on the floor. Remove the two plugs that cover the screws for adjustment of the rollers found at the bottom of frame. Put a screwdriver into each hole and turn them counterclockwise to pull the rollers back. This will allow enough space to take the door from the sawhorses and put it back on the sawhorses.
Handle is not working properly
Over time, your sliding door handle can become loose from the strike plate it is attached to. The good thing is that a loose handle can be easily fixed. Use a screwdriver to tighten the screws holding the door handle to the strike plate. Be cautious not to tighten too much, as this can damage the inner mechanism and cause the handle to cease working correctly.
If a sliding patio door becomes difficult to slide, the problem is often caused by debris blocking the rollers. Hair, dust, dirt and fur often get into the tracks, causing the door to stop moving smoothly. To promote smooth operation, begin by cleaning the rollers.
The most frequent issue is when your sliding patio door lock no longer works. This could be due to a misaligned, or broken handle. The lock mechanism could be replaced or the handle adjusted.
A screen door that isn't able to close or unlock is not an enjoyable experience. A faulty screen can be dangerous. If the screen isn't properly aligned with the door frame, it can rub against the frames and cause wear to both the screen as well as the door. The solution to screen that isn't functioning correctly is quite simple. Check whether the latching bar is still in place. If it's not in its place, remove it and replace with the replacement. Reinstall the screen after replacing the latching rod. Make sure that the hinges are correctly set. Install screws into the holes of the frame for a finished appearance.
Weatherstripping that isn't working properly
The weather stripping that is placed between your frame and door helps close the gap, keeping out drafts, cold air and insects. If yours is damaged, cracked or discoloured it's time to replace it. It's not difficult to do. Some people replace only the worn part, but it is more straightforward to replace the entire item.
First, make sure that the gap is not near the seat point at which the weather strip is placed on the frame. If it is, you'll need to seal it back to the frame with weather strip adhesive.
Next, check the entire perimeter of your weather strip. Use your dollar bill to check whether the weather strip is sealed. Simply place the bill half towards the seal and close the door to check whether it is able to pull away from the flange of metal of the weather strip. If it is easy to remove, it's time to replace the weather strip.
It is also possible to lubricate the run channel (the groove of felt and rubber that runs vertically on both sides of your door) to help prevent the accumulation of ice during winter. You can buy a spray lubricant from your local hardware store that will work however be careful not to get any on your glass.
Spreading www.repairmywindowsanddoors.co.uk underneath your door will prevent it from sticking, just like salt. Don't leave sand at the bottom of your door as it can cause damage to the concrete and rubber of the weather strip.
Glass that is damaged
There are a myriad of circumstances that could result in sliding glass for patio doors breaking or cracking. Whether it's from an accident or a bump, if the glass on your patio door is damaged, it's important to have it replaced promptly to ensure that your home is properly sealed and insulated.
Over time, sliding doors become susceptible to damage because of regular use and exposure to elements. Patio doors that are not working properly can be caused by rusty rollers, defective handles or bent tracks. Repair specialists for sliding patio doors are able to pinpoint the root of the issue and perform any necessary repairs or replacements.
Besides obvious visible damage, a damaged patio door could also impact your energy bills. A gap between the frame of the patio door and the glass can cause drafts and temperature differences. This can be costly both in winter and summer when you must spend money to heat or cool your home.
You can repair a damaged panel on your sliding patio without removing the whole door. In certain situations it is the best choice if you want to get your door functioning as soon as you can. Whatever the case, whether you're replacing the glass or the frame, it's essential to have all the required tools in your arsenal to ensure the task can be done quickly and safely. This includes gloves as well as a small bar or hammer, a putty knife, tape a measuring tape and a glass replacement. DIY Door Store offers all the necessary tools to repair your damaged sliding patio doors quickly and easily.
Frame that is damaged or loose.
Sliding patio door systems are designed to allow easy outdoor-indoor movement and offer a natural flow. But, as with any other home appliance they're susceptible to wear and tear over time which affects their functionality. While some damage can be easy to fix yourself however, some require the assistance of a professional to ensure your door is in good condition.
If you can see evidence of damage, such as scratches and dents It's time to replace your sliding door. These damages impact the security and energy efficiency of your patio door as well as its aesthetics.
Rollers or tracks that are not aligned properly are common causes for your sliding door to stop functioning properly. This can be due to debris or dirt accumulation on the track, and can usually be resolved by using pliers to straighten out the rails.
Regularly cleaning the rollers and tracks on your sliding patio doors is crucial. Dirt can cause them to become stiff or stymied, which can stop them from moving freely. By using a hand brush or vacuum cleaner, or a spray-down that includes a jet wash can assist in clearing any obstructive build-up. Applying a silicone-based lubricant on your tracks can also help to facilitate smooth operation and help prevent premature wear.
Over time, slamming the door to the patio could cause serious damage to the frame and the glass panel. This could result in broken or loose frames, bent tracks, and handles that become difficult to open and close. Screen door frames for sliding are usually less durable than glass sliding doors, making them more prone to damage. However, if you've got a broken screen door frame it is usually repaired by resealing the gap with silicone lubricant, and then applying new sealant around the perimeter of the glass.